Hi, Quoting from the link below, https://www.aerospike.com/docs/operations/plan/ssd/ssd_certification.html#pcie-nvme-based-flash These devices were tested at the specified speed with a 67% read/33% write ratio of 1.5 KB objects over 24 hours.
How to calculate the configuration for above mentioned “67% read/33% write ratio” , specifically looking what will be read-reqs-per-sec: & write-reqs-per-sec values for such a configuration.
I could understand the 1x/30x/60x etc variation of the test, what would be the read-write ration in these cases?
Any help is highly appreciated.
Thanks.
